Skip to main content

DIY Collar for your Shirt

Hey DIYers,

I haven't done a fashion DIY in a while, so that's why today's DIY is a DIY Collar for your Shirt! What's cool about this collar is that if your shirt is plain af, you can put the collar on, and it makes your plain shirt into a collared cute shirt!

Things you'll need:
- A collared flannel or shirt (I recommend getting one from a thrift shop, because it'll be cheap!)
- Decorations for your collar, such as studs, sequins, etc.
- Scissors
- Hot glue (if needed)

Steps:
1. With scissors, cut off the collar of the flannel or collared shirt, with the first button included! (See picture for example)
2. On the collar, glue your decorations on! However, if you use something like buttons to decorate, you will want to sew the buttons to the collar to make it to stay longer though.
3. You're done!
4. To make your shirt have a collar, unbutton the button on the collar, put the collar around your neck, and button it!

I hope you enjoyed this DIY! So simple, so cute, right? If you want to read more of my fashion DIY's, click HERE!

-Madi from DIY With Madi

Comments

Popular posts from this blog

DIY Sim Halloween Costume

Hey DIYers! Today's DIY is perfect if you haven't figured out what to be for Halloween! I was thinking about cheap, but clever Halloween costumes that would be really really recognizable, and I came up with.... a DIY Sim Halloween Costume! Let's get started with the DIY!

What you'll need:
- A plain headband the color of your hair
- THIS template
- Scissors
- Tape or Glue
- Hot Glue
- 3 feet of long, sturdy (can hold up a little weight without bending), thin wire

Steps:
1. Print out THIS template on green paper (OR, USE MARKERS AND COLOR IT IN!)
2. Cut out each half of the sim plumbob (the diamond-y shape) on the DOTTED lines.
3. Fold on the solid lines of each half of the plumbob, and fold the tabs inward
4. Tape or glue the tabs to form each half of the plumbob.
5. Tape or blue each half of the plumbob together, to create the final plumbob.
6. Puncture a tip of the plumbob with the long, sturdy, thin wire.
7. Use the hot glue to glue the wire in place (so it doesn'…

Make your own EOS lip balm!

So everyone has EOS lipbalm at your school, and you don't. Have no fear, because you've come to the right place! Now, you can fit in with the crowd, and have moist lips.

*Okay, yeah yeah yeah. Stop talking, Madi!*
Then let's get to it!
You will need:  A plastic Easter egg, or any other sphere-like shaped item that can be opened and closedVaseline (petroleum jelly)Plastic WrapAny flavored extract (I prefer vanilla or strawberry)A bowl (Use a paper bowl if you don't want to clean up a sticky mess!)A MICROWAVE! A ff-rrrr-eeeee-zzzzzzz-er (Freezer, in case you couldn't read that fairly easy word)

1. Take your Vaseline, and scoop out 2-4 scoops, depending on how big your egg is, and then pour in a small amount of your extract! A little goes a looooonnnnnnnggggggggg way. (c) www.wikihow.com
2. Heat that bowl in the microwave for about 30 seconds to 1:15. It depends on how hot your microwave gets... (c) www.wikihow.com

4. WHILE THE VASELINE IS MELTING IN THE MICROWAVE, Open …

DIY Halloween Ghost-in-a-Graveyard Pudding Cups

Hi DIYers! Since it is almost Halloween, I decided to do a DIY on Halloween Ghost-in-a-Graveyard Pudding Cups. These taste SOOOOO good, and they are perfect to make if you have a Halloween party!

What you'll need:
-Pudding cups
-Ghost Halloween Peeps Mashmallows
-Pumpkin shaped candy-corn
-Oreos (1 pack per 4 pudding cups)

Steps:
1. Take the seal off the pudding cup 2. Crush up one row of oreos in the pack, by putting them in a plastic bag, and hitting them with a spoon. 3. Put the crushed oreos on the top of the pudding. 4. Place a Ghost Peep Marshmallow a tiny bit in the pudding cup (see picture for example). 5. Place a pumpkin candy-corn right in front of the ghost peep marshmallow.
You're Done!


Thanks for reading! Stay tuned for the next post! And if you want some more food DIY's, click HERE!
-DIY With Madi