Skip to main content

DIY Snowman EOS!

Hey everyone, I hope you are having a happy December so far. Today's DIY is a DIY in my EOS Series! (Click HERE to see all of my other EOS DIYs!) a DIY Snowman EOS! (I know I already did a Snowman DIY this month, but I hope you don't mind!)

What you'll need:
- Orange EOS
- Craft knife
- -Styrofoam block (There should be this paper substance covering each side with Styrofoam in the middle)
-Hot Glue or Glue Stick
- THIS snowman holiday card

Steps:
1. Print out the snowman holiday card.
2. Cut the Styrofoam block so it is the same size as the printout
3. Glue the reindeer outline printout onto the Styrofoam sheet and smooth it down so there isn't any bubbles
4. Using the craft knife, (PLEASE BE CAREFUL!) cut out the orange nose while cutting out a little chunk of the styrofoam with it.
5. Put the eos in the cut-out hole! It should rest perfectly in there, but it might fall out if you didn't cut deep enough into the styrofoam!


I hope you enjoyed this DIY! Please stay tuned for more posts coming soon!
-DIY With Madi



Popular posts from this blog

DIY Sim Halloween Costume

Hey DIYers! Today's DIY is perfect if you haven't figured out what to be for Halloween! I was thinking about cheap, but clever Halloween costumes that would be really really recognizable, and I came up with.... a DIY Sim Halloween Costume! Let's get started with the DIY!

What you'll need:
- A plain headband the color of your hair
- THIS template
- Scissors
- Tape or Glue
- Hot Glue
- 3 feet of long, sturdy (can hold up a little weight without bending), thin wire

Steps:
1. Print out THIS template on green paper (OR, USE MARKERS AND COLOR IT IN!)
2. Cut out each half of the sim plumbob (the diamond-y shape) on the DOTTED lines.
3. Fold on the solid lines of each half of the plumbob, and fold the tabs inward
4. Tape or glue the tabs to form each half of the plumbob.
5. Tape or blue each half of the plumbob together, to create the final plumbob.
6. Puncture a tip of the plumbob with the long, sturdy, thin wire.
7. Use the hot glue to glue the wire in place (so it doesn'…

DIY 3D Paper Snowflakes!

Happy December everyone! Today's DIY is how to make these super cute and decorative 3D Paper Snowflakes! These are perfect for the holidays because they're not religious! Plus, they don't necessarily need to be for the holidays- they can just be a yearly thing!


What you'll need:
-2 pieces of regular sized sheets of paper
-A printer
-Scissors
-Tape
-Hole Puncher
-String

Instructions:
1. Print out this PDF File twice (It makes the whole process a LOT easier than doing it without a template...)
2. Use your scissors and cut out the squares. We only need six of the squares to make one snowflake, so you can discard the extra two, or save them for another snowflake.
3. Fold each square diagonally.
4. Cut on the lines of each diagonally-folded square piece of paper.
5. Unfold everything. It should look like this:

6. Fold the inner cuts and tape it like this:

7. Turn the paper over and tape the second set of cuts together like so:

8. Turn the paper over again and tape it until …

DIY Homecoming Proposals

Hey DIYers! Today's DIY is DIY Homecoming Proposals, so this DIY is perfect if you want to ask that special someone. I will be sharing 10 Homecoming Proposal ideas that you can DIY! For these, I won't be listing what materials you need, because as you know, a picture says a thousand words (or rather can give you all the instructions!). Let's get started!

1. Milkshake Homecoming Poster


2. Starbucks "Caution, you're extremely hot!" Secret Message!


3. Donut Homecoming Proposal


4. Cute picture collage Poster


5. Candy Proposal


6. Swimming Proposal (PERFECT IF THE PERSON YOU'RE ASKING FOR IS ON SWIM TEAM!)


7. Chick-Fil-A Proposal


8. Sucker Homecoming


9. Car Balloon Proposal


10. Frozen Homecoming


You're done! I hope you enjoyed this DIY tutorial for DIY Homecoming Proposals! Good luck at your homecoming, and stay tuned for more DIYs coming soon! -Madi from DIY With Madi