Skip to main content

DIY With Madi (EOS SERIES) - Halloween With Madi - 3 Halloween Inspired EOS sphere!

Hey to all my DIY EOS Lipbalm fans! Today's post is starting my Halloween DIY's, but also continuing my DWM EOS series! Today I'm gonna show you how to make your EOS turn into a pumpkin, a mummy, and a Black Cat! NOTE THAT ALL OF THESE WERE MY IDEAS! IF YOU WANT TO USE MY IDEAS PLEASE CREDIT ME!
--
1. Halloween Pumpkin EOS
What you'll need:
-Tangerine EOS Lipbalm
-Black Sharpie
-Green Sharpie

STEPS:

  1. Using your black sharpie, outline two triangles for the pumpkins eyes on the Tangerine EOS Sphere. Space them evenly, and color them in. This should be on the top half of your EOS sphere.
  2. Outline a mouth for your pumpkin in black sharpie. Color it in.
  3. Use your green sharpie, and draw a small circle on the top of the EOS Sphere. Then draw connecting lines that swirl around your EOS. Add leaves too. this represents the stem!
--
2. Mummy EOS
What you'll need:
-Vanilla Bean EOS Lipbalm
-Black Sharpie
-Small Googlie Eyes
-Glue Gun

STEPS:
  1. Use your black sharpie, and lightly outline strips of a mummy on your EOS. 
  2. Using your black sharpie again, make a 1cm banner around the top half of the EOS, and fill it in.
  3. Use the glue gun and glue on your googlie eyes inside the banner. Space evenly.
--
3. Black Cat
What you'll need:
-Vanilla Bean EOS
-Black Sharpie
-Pink Sharpie
-NEON Green Sharpie

STEPS:
  1. Make a small upside down isosceles triangle in the middle of the EOS sphere. This is the cat's nose.
  2. Draw two green circles on the top half of the EOS sphere (EYES), near the nose
  3. Color the side (vertically) WITHOUT the pink and green on it black. But only color that half of the sphere.
  4. On the other side, draw a line just a little bit higher than the green eyes. Color everything black that is below that line.
  5. Draw two ears on the sphere where there is still white showing!

THAT'S IT FOR THIS POST! PLEASE SHARE WITH EVERYONE YOU KNOW, COMMENT DOWN BELOW, AND HAVE A FABULOUS HALLOWEEN W/ MOIST LIPS!
-Madi
PS. THIS IS NOT SPONSORED BY EOS! 

Popular posts from this blog

Make your own EOS lip balm!

So everyone has EOS lipbalm at your school, and you don't. Have no fear, because you've come to the right place! Now, you can fit in with the crowd, and have moist lips.

*Okay, yeah yeah yeah. Stop talking, Madi!*
Then let's get to it!
You will need:  A plastic Easter egg, or any other sphere-like shaped item that can be opened and closedVaseline (petroleum jelly)Plastic WrapAny flavored extract (I prefer vanilla or strawberry)A bowl (Use a paper bowl if you don't want to clean up a sticky mess!)A MICROWAVE! A ff-rrrr-eeeee-zzzzzzz-er (Freezer, in case you couldn't read that fairly easy word)

1. Take your Vaseline, and scoop out 2-4 scoops, depending on how big your egg is, and then pour in a small amount of your extract! A little goes a looooonnnnnnnggggggggg way. (c) www.wikihow.com
2. Heat that bowl in the microwave for about 30 seconds to 1:15. It depends on how hot your microwave gets... (c) www.wikihow.com

4. WHILE THE VASELINE IS MELTING IN THE MICROWAVE, Open …

DIY Sim Halloween Costume

Hey DIYers! Today's DIY is perfect if you haven't figured out what to be for Halloween! I was thinking about cheap, but clever Halloween costumes that would be really really recognizable, and I came up with.... a DIY Sim Halloween Costume! Let's get started with the DIY!

What you'll need:
- A plain headband the color of your hair
- THIS template
- Scissors
- Tape or Glue
- Hot Glue
- 3 feet of long, sturdy (can hold up a little weight without bending), thin wire

Steps:
1. Print out THIS template on green paper (OR, USE MARKERS AND COLOR IT IN!)
2. Cut out each half of the sim plumbob (the diamond-y shape) on the DOTTED lines.
3. Fold on the solid lines of each half of the plumbob, and fold the tabs inward
4. Tape or glue the tabs to form each half of the plumbob.
5. Tape or blue each half of the plumbob together, to create the final plumbob.
6. Puncture a tip of the plumbob with the long, sturdy, thin wire.
7. Use the hot glue to glue the wire in place (so it doesn'…

DIY Halloween Ghost-in-a-Graveyard Pudding Cups

Hi DIYers! Since it is almost Halloween, I decided to do a DIY on Halloween Ghost-in-a-Graveyard Pudding Cups. These taste SOOOOO good, and they are perfect to make if you have a Halloween party!

What you'll need:
-Pudding cups
-Ghost Halloween Peeps Mashmallows
-Pumpkin shaped candy-corn
-Oreos (1 pack per 4 pudding cups)

Steps:
1. Take the seal off the pudding cup 2. Crush up one row of oreos in the pack, by putting them in a plastic bag, and hitting them with a spoon. 3. Put the crushed oreos on the top of the pudding. 4. Place a Ghost Peep Marshmallow a tiny bit in the pudding cup (see picture for example). 5. Place a pumpkin candy-corn right in front of the ghost peep marshmallow.
You're Done!


Thanks for reading! Stay tuned for the next post! And if you want some more food DIY's, click HERE!
-DIY With Madi