Skip to main content

DIY Blended EOS!

JSYK: I'M STARTING AN EOS SERIES ON DIY WITH MADI!!! 

Most of my views on this blog is my DIY EOS Lipbalm, so I decided to do another EOS DIY! Maybe you have 2 EOS that you adore, but don't have enough room for in a purse or backpack? Have you ever thought about.... combining the scents/flavors?! I don't have any pictures for this DIY to show you because THIS DIY WAS COMPLETELY MY IDEA (also I didn't have a camera to to take pictures with...)

 All you need is:
-2 EOS lipbalms
-A Small Microwavable bowl
-A Microwave
-Butterknife
-Spoon
-Plastic Wrap
-Freezer
-OPTIONAL: A match, lighter, etc.
-OPTIONAL: Vaseline

1. Before anything, twist one of the EOS caps/tops (whateva you wanna call them) and line the plastic wrap in the cap/top so when you pour the lipbalm, it takes the EOS shape!
2. So after you open both EOS spheres, use the knife to slice off the rounded top of the balm
3. Put them in the small bowl together, and put in microwave for as long until they're melted. I'm not giving a specific time because each microwave has a different heat preference.
4. Once melted together, use a spoon to stir it together, but quickly. Then pour into the EOS cap/top!
5. Put into freezer until hard and not melted anymore!
6. Peel eos balm from plastic wrap!
7. Now for this step there is 2 options! Either do it the safe or unsafe version.

SAFE: Scoop a little vaseline into a bowl and melt. Then quickly use your fingers and dip them in the vaseline. Working quickly, use the vaseline as a seal for your blended balm, and the EOS sphere base. Then use your finger to even it out so it looks nice.

NOT SAFE: Use your source of heat and gently melt the end of the EOS balm we just melted. Then quickly place on the EOS sphere base, and then make it look nice.

THANKS FOR READING! SHOW ME YOUR CREATIONS!

Popular posts from this blog

DIY Sim Halloween Costume

Hey DIYers! Today's DIY is perfect if you haven't figured out what to be for Halloween! I was thinking about cheap, but clever Halloween costumes that would be really really recognizable, and I came up with.... a DIY Sim Halloween Costume! Let's get started with the DIY! What you'll need: - A plain headband the color of your hair - THIS template - Scissors - Tape or Glue - Hot Glue - 3 feet of long, sturdy (can hold up a little weight without bending), thin wire Steps: 1. Print out THIS template on green paper (OR, USE MARKERS AND COLOR IT IN!) 2. Cut out each half of the sim plumbob (the diamond-y shape) on the DOTTED lines. 3. Fold on the solid lines of each half of the plumbob, and fold the tabs inward 4. Tape or glue the tabs to form each half of the plumbob. 5. Tape or blue each half of the plumbob together, to create the final plumbob. 6. Puncture a tip of the plumbob with the long, sturdy, thin wire. 7. Use the hot glue to glue the wire in place ...
Read more awesome stuff »

DIY TOLO Proposals

Hey DIYers! It's March which means TOLO, also known as Sadie Hawkins, is happening at most high schools! TOLO is a school dance where girls ask guys/whoever they want to ask (for example, I'm asking my best friend instead of a guy!) Today's DIY will show you 5 poster ideas for you to use. Let's get started! For the gamer: This FortNite poster will give you a yes in under a second! So cute! A post shared by Prom, Hoco, Sadies, & more! 💕💍 (@the.promposals) on Mar 23, 2018 at 4:31pm PDT For the comedian: Sticky-note your date's car for a good laugh between the two of you. (Spell out TOLO instead of Homecoming though) For the foodie: Everyone loves Chicken Nuggets, and this poster's pun (lucky nugget) would be perfect when asking out your date! For the athlete: The best part about this poster is that TOLO has two O's, so you can draw your date's sport as replacements. For example, draw baseballs for the O's if he/she play...
Post a Comment
Read more awesome stuff »

DIY Unlimited Customizable Phone Case!

Hey DIYers! Today's DIY, I think, is one of my most favorite DIY ideas ever! It's a DIY phone case, but better yet, it can be customized... UNLIMITED TIMES! This DIY is PERFECT for people on a budget, because instead of getting multiple phone cases, you only need 1! What you'll need: - A clear phone case - Cardstock Paper - Pencil - Markers, Washi tape, glitter, stickers... Whatever you want to make your phone case look amazing! - Exacto Knife (Please get parent's permission!) Steps: 1. Using your pencil, trace the phone case, including the camera hole. 2. Use an exacto knife to cut the shape out! 3. Try to fit the paper in the case. Most likely it'll be a little too big because the outside of the case is bigger than the inside, so trim the paper accordingly to fit the inside of the phone case. 4. Once the paper fits inside the phone case, decorate it however you'd like! The only thing is that you CANNOT make the design 3D (like glitter glue that r...
Read more awesome stuff »