Hey DIYers! Today's DIY is perfect if you haven't figured out what to be for Halloween! I was thinking about cheap, but clever Halloween costumes that would be really really recognizable, and I came up with.... a DIY Sim Halloween Costume! Let's get started with the DIY!
What you'll need:
- A plain headband the color of your hair
- THIS template
- Scissors
- Tape or Glue
- Hot Glue
- 3 feet of long, sturdy (can hold up a little weight without bending), thin wire
Steps:
1. Print out THIS template on green paper (OR, USE MARKERS AND COLOR IT IN!)
2. Cut out each half of the sim plumbob (the diamond-y shape) on the DOTTED lines.
3. Fold on the solid lines of each half of the plumbob, and fold the tabs inward
4. Tape or glue the tabs to form each half of the plumbob.
5. Tape or blue each half of the plumbob together, to create the final plumbob.
6. Puncture a tip of the plumbob with the long, sturdy, thin wire.
7. Use the hot glue to glue the wire in place (so it doesn't come out of the plumbob)
8. Wrap 5 inches of the wire (opposite end of the plumbob) around the headband.
9. Hot glue wire in place (so it doesn't move/come off the headband).
10. Let headband sit for an hour.
You're Done!
I hope you enjoyed this easy DIY Sim Halloween Costume! Even though there are a lot of steps, it is seriously the most simplest costume, and cleverest costume ever, and you'll impress a ton of your friends!
Stay tuned for the next post!
~DIY With Madi
What you'll need:
- A plain headband the color of your hair
- THIS template
- Scissors
- Tape or Glue
- Hot Glue
- 3 feet of long, sturdy (can hold up a little weight without bending), thin wire
Steps:
1. Print out THIS template on green paper (OR, USE MARKERS AND COLOR IT IN!)
2. Cut out each half of the sim plumbob (the diamond-y shape) on the DOTTED lines.
3. Fold on the solid lines of each half of the plumbob, and fold the tabs inward
4. Tape or glue the tabs to form each half of the plumbob.
5. Tape or blue each half of the plumbob together, to create the final plumbob.
6. Puncture a tip of the plumbob with the long, sturdy, thin wire.
7. Use the hot glue to glue the wire in place (so it doesn't come out of the plumbob)
8. Wrap 5 inches of the wire (opposite end of the plumbob) around the headband.
9. Hot glue wire in place (so it doesn't move/come off the headband).
10. Let headband sit for an hour.
You're Done!
I hope you enjoyed this easy DIY Sim Halloween Costume! Even though there are a lot of steps, it is seriously the most simplest costume, and cleverest costume ever, and you'll impress a ton of your friends!
Stay tuned for the next post!
~DIY With Madi